Best Practices for Site Deployments
The following is a list of best practices recommended for CloudLink site deployments:
- If there is no DHCP server on site, configure a MiVoice Office PBX or use another DHCP server.
- For standalone platforms, the CloudLink Gateway appliance and MiVoice Office PBX should be installed on the same LAN subnet. If this is not done, disable all SIP ALG functions in the firewall to enable communication between these two components. Additionally, ensure that port blocking is disabled.
- When you configure a firewall, ensure that the path to the Internet is open before you set the site rules.
- For remote access management, separate the data networks from the voice networks.
- Ensure that your end-user mobile carrier supports propagation of incoming caller ID.
- To ensure that the Welcome/Deployment emails do not get rejected by the mailbox, you must include the * .mitel.io alias in the user's e-mail whitelist.
- Ensure that the user database in the MiVoice Office PBX is updated accurately and User Groups are labeled with informative names to enable importing contacts into CloudLink applications such as Mitel One.
- CloudLink solution supports the following emergency numbers: 000, 110, 111, 112, 118 119, 911, and 999, which are specific to each supported country. To ensure that there are no dialing conflicts, the administrator must configure these emergency numbers in MiVoice Office 400.
- To ensure optimal network efficiency with free flow of data using minimum network bandwidth, you must enable Bandwidth Optimization. For more information about how to enable Bandwidth Optimization, see Account Information in Mitel Administration documentation. To learn more about Bandwidth Optimization, see System Requirements in CloudLink Platform documentation.
Ensure that you enter the IP Address or FQDN value that is displayed in the Network Element form. For more information about entering PBX information see, Enter PBX Information.
- It is strongly recommended not to deploy CloudLink directly on the Wide Area Network to ensure that the CloudLink solution is properly secured. See the following Mitel KMS articles related to Network Security and Toll Fraud prevention for the Mitel Office PBX installations:
For more information about configuring the firewall for CloudLink deployments, see Configuration Prerequisites.
↑